Compact 2-Pocket Wallet Kit
Posted by LeatherCraftTools.com (Dec 9, 2020)
A wallet kit that is completed by folding over one piece of leather, with minimal sewing and fitting of hardware required.
-
1.
-
Cut the leather for the item, assuming finished dimensions of about 9.5 cm x 7.5 cm.
Here we use the LeatherCraftTools.com kit "Compact 2-Pocket Wallet Kit".
-
2.
-
Finish the flesh side of the leather, and the edge of the leather except for the laminated area.
-
3.
-
-
4.
-
Using Spring Snap Setter, attach the male part of?spring snap fasteners to the main part of the leather.
-
5.
-
-
6.
-
Roughen the surface to be glued with an abrasive stick or the like.
-
7.
-
Apply bond to one side of the gluing surface, bend the leather, and carefully paste it together so that the edges are aligned.
-
8.
-
-
9.
-
Use a clip or Hand Crimper Wide to crimp securely.
-
10.
-
Finish the edge of the leather glued together.
-
11.
-
Sew the part that has been glued together.
This sample was sewn using VINYMO <MBT> Polyester Machine Thread (thickness: # 5, color: 171).
-
12.
-
Stack the partitions on top of each other, poke holes in them with a stitching chisel, etc., and pinch them together by hand sewing.
-
13.
-
-
14.
-
-
15.
-
Using Spring Snap Setter, attach the female part of spring snap fasteners?to the flap part.
-
16.
-
-
17.
-
-
18.
-
-
19.
-
Make sure the snap fastener is securely fastened, and finish shaping.
-
20.
-
Complete.
-
21.
-
Example of use.
Sign in to post a comment!
Show more