iPad mini Case

Posted by Craftip (Jun 9, 2014)

Good

This tip helped your project

I made it by appending pieces of leather. As to the inner case, I sewed up the pieces from Dollar Shop.

This post is credited to hosbow.
See the original post in Japanese site.

1.: I've inserted some cardboard inside in order to provide the tension. And for the bending part, I made a cut.

2.: Since I'm appending pieces of leather, I sewed them together with the cardboard. I used some masking tape for guidelines so that it wouldn't become so obvious.

3.: Appending is done.

4.: For lining the similar process has been done as the outside. To make the iPad stand, two lines were made. The thickness was adjusted with cardboard. The right line is as a pocket, while the left line can have a sheet of paper placed in it.